Welcome to Cheshire Design Centre

CALL FOR ADVICE ON : 01260 290044

Basket:

0 item(s)
×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

More Views

Schiedel Isokern Support Lintel 1500 x 140 x 140mm Max Load (per pair) 3250kg

Availability: In stock

Excl. VAT: £92.28 Inc. VAT: £110.74

Quick Overview

Schiedel Isokern Support Lintel 1500 x 140 x 140mm Max Load (per pair) 3250kg
Our pre stressed lintels must be installed above the fireplace recess, for this method a support plate is required under the support block.
The support block is bedded onto the slab lintel using weak mix mortar.
A stainless steel adaptor is used to connect from the support block to the stove flue pipe.
This adaptor is pushed up onto the support block spigot (fibre rope should be used to create a seal).
It is recommended to have a minimum of 600mm length of flue pipe before connecting to the chimney.

Details

Schiedel Isokern Support Lintel 1500 x 140 x 140mm Max Load (per pair) 3250kg
Our pre stressed lintels must be installed above the fireplace recess, for this method a support plate is required under the support block.
The support block is bedded onto the slab lintel using weak mix mortar.
A stainless steel adaptor is used to connect from the support block to the stove flue pipe.
This adaptor is pushed up onto the support block spigot (fibre rope should be used to create a seal).
It is recommended to have a minimum of 600mm length of flue pipe before connecting to the chimney.
Pumice liners are ideal for new build as well as relining existing masonry chimneys
The features of this system are:
Lightweight materials, easy to use ,handle and cut
Highly insulating pumice for better draw and minimum heat loss
600mm and 1000mm lengths mean fewer joints and fast to install
15 flue sizes available
Good resistance to temperature variations gives the maximum performance for your appliance
CE certified to EN1857 with the designation T450, N2, D, 3, G.
Three angles of bends available for maximum versatility.

Additional Information

Chimney Type No
My Basket

You have no items in your shopping cart.