Welcome to Cheshire Design Centre

CALL FOR ADVICE ON : 01260 290044

Basket:

0 item(s)
×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

More Views

Schiedel Isokern 200mm id - 45 deg Rebated T Liner 600mm High

Availability: In stock

£159.60

Quick Overview

Schiedel Isokern 200mm id - 45 deg Rebated T Liner 600mm High
Also available in 150mm id & 175mm id
The Isokern T Liner is normally used when installing a stove that is free standing
A stainless steel adaptor is glued to the Isokern T Liner with lip glue
The flue pipe connects to the adaptor, it is a push fit over the spigot on the adaptor.
A soot door must be provided below the flue pipe entry to allow for inspection and removal of soot and debris.
A suitable wall sleeve is to be used to seal the cavity wall.
Any combustible insulation within the wall must be kept away from the single skin connecting flue pipe by at least 1.5 x its diameter.
Seal off the gap between the flue pipe and wall sleeve with fire proof rope and closing plate.

Details

Schiedel Isokern 200mm id - 45 deg Rebated T Liner 600mm High
Also available in 150mm id & 175mm id
The Isokern T Liner is normally used when installing a stove that is free standing
A stainless steel adaptor is glued to the Isokern T Liner with lip glue
The flue pipe connects to the adaptor, it is a push fit over the spigot on the adaptor.
A soot door must be provided below the flue pipe entry to allow for inspection and removal of soot and debris.
A suitable wall sleeve is to be used to seal the cavity wall.
Any combustible insulation within the wall must be kept away from the single skin connecting flue pipe by at least 1.5 x its diameter.
Seal off the gap between the flue pipe and wall sleeve with fire proof rope and closing plate.
The linings are suitable for all fuels but not suitable for condensing appliances –including pellet or biomass
Lightweight materials, easy to handle
Pumice liners are ideal for new build as well as relining existing masonry chimneys
Highly insulating pumice for better draw and minimum heat loss
Good resistance to temperature variations gives the maximum performance for your appliance.
CE Certified to EN1858 with the designation T450, NI, D, 3, G
Three angles of bends available for maximum versatility

Additional Information

Chimney Type Pumice Liner
My Basket

You have no items in your shopping cart.