Description
Schiedel Isokern 175mm id – 45 deg Rebated T Liner 600mm High
Also available in 150mm id & 200mm id
The Isokern T Liner is normally used when installing a stove that is free standing
A stainless steel adaptor is glued to the Isokern T Liner with lip glue
The flue pipe connects to the adaptor, it is a push fit over the spigot on the adaptor.
A soot door must be provided below the flue pipe entry to allow for inspection and removal of soot and debris.
A suitable wall sleeve is to be used to seal the cavity wall.
Any combustible insulation within the wall must be kept away from the single skin connecting flue pipe by at least 1.5 x its diameter.
Seal off the gap between the flue pipe and wall sleeve with fire proof rope and closing plate.
The linings are suitable for all fuels but not suitable for condensing appliances –including pellet or biomass
Lightweight materials, easy to handle
Pumice liners are ideal for new build as well as relining existing masonry chimneys
Highly insulating pumice for better draw and minimum heat loss
Good resistance to temperature variations gives the maximum performance for your appliance.
CE Certified to EN1858 with the designation T450, NI, D, 3, G
Three angles of bends available for maximum versatility